thlillyr
XS400 Addict
My bike runs great above 2800 rpms. It seems to idle fine aswell however when i put it in gear and try to accelerate i get zero power. bike just seems to sputter and very very gradualy accelrates. Probably takes a good 10 seconds to go from 1200 rpm to 2500 then the bike takes off. Giving in more or less throttle makes no difference.
I've tried adjusting the idle screws. from 2 turns all the way up to 4 1/2 turns no difference at all. I don't know if im adjusting the right screw. Is it the 2 screws on top front of the carb. 1 screw per carb. Gotta lift the gas tank to reach them. could someone point out the screw in a picture? I've got a clean air filter k&n and the carbs a perfectly clean by a professional.
This is my first bike so if this is normal behavior let me know.
I've tried adjusting the idle screws. from 2 turns all the way up to 4 1/2 turns no difference at all. I don't know if im adjusting the right screw. Is it the 2 screws on top front of the carb. 1 screw per carb. Gotta lift the gas tank to reach them. could someone point out the screw in a picture? I've got a clean air filter k&n and the carbs a perfectly clean by a professional.
This is my first bike so if this is normal behavior let me know.