Reassemble front tier xs400

[SlickRick]

I have reinstalled my front tier. But to align it right I released the two bolts that clamp on the spindle bar. When I did this the fork
came back away from the tire hub. Is that correct or not. If not what is the procedure?? THANKS FOR ANY HELP

 

[xschris]

Tighten the nut side first. This will align the wheel where it needs to be. Then do the clamp side.

 

[SlickRick]

Thank you so much. I released the clamp after tightening the nut and it moved out from the hub. that should be an alignment too.

Thanks for your help.