Signals Horn and dash lights stopped working

[Andrew301]

I recently picked up a 82 XS400 Maxim, she’s a little rough but runs good. Everything was working on it then my signal lights, horn, oil and neural lights stopped working. Fuses look ok Any ideas? Thanks

 

[buztabuzt]

If original tube fuses they can look ok but still be burnt on edges.

Otherwise, get out your voltage meter and start testing for 12V on up the wiring. Check for unsecure grounding. Believe headlight bucket has most of that wiring

 

[Andrew301]

If original tube fuses they can look ok but still be burnt on edges.

Otherwise, get out your voltage meter and start testing for 12V on up the wiring. Check for unsecure grounding. Believe headlight bucket has most of that wiring

Thanks.

 

[Andrew301]

Thanks.

I will pick up some new fuses and go from there

 

[buztabuzt]

Not suggesting you but first before inspecting. Suggesting inspect and if burnt replace. I had one that looked good from top and testing continuity it wasn't passing through fuse box. Took out fuse and saw it blew a hole in the end of it.