Pipeburn
XS400 New Member
- Messages
- 3
- Reaction score
- 0
- Points
- 1
I got tired of having to statically time my bike, so I made a polycarbonate timing cover so that I could do it with a timing light.
It's 1/2" polycarbonate, I cut the outside shape with a bandsaw, then smoothed it out with a belt sander. Then I used a mill to get clearance for the crank and the 3 bolt heads, .400" was plenty.
I'm pretty happy with it, timing my bike now takes significantly less time.
Let me know if you have any questions!
It's 1/2" polycarbonate, I cut the outside shape with a bandsaw, then smoothed it out with a belt sander. Then I used a mill to get clearance for the crank and the 3 bolt heads, .400" was plenty.
I'm pretty happy with it, timing my bike now takes significantly less time.
Let me know if you have any questions!