armyofda12mnkeys
XS400 Addict
I've always measured float level with my electric caliper correctly based on reading many threads here (making sure to measure it from the inside of the carb where the gasket is placed as recommended here ),
but I thought I'd grab this tool I saw a couple others on the forums got or made to see if my float measurements are really correct...
http://www.ebay.com/itm/like/271428570431?lpid=82&chn=ps
Anyway here are pics of carb with the tool below and wondering if any of these look like they can be modified slightly.
Where should the gas level be reaching (maybe someone can Photoshop the level to easier identify it for others as well)?
One carb's gas level is between the top of the float bowl and the bottom edge of the top
(makes more sense with the pics below what i define as the 'between both edges area'):
The other carb is at the bottom of that edge of the float bowl:
Thanks for any direction!,
Ari
but I thought I'd grab this tool I saw a couple others on the forums got or made to see if my float measurements are really correct...
http://www.ebay.com/itm/like/271428570431?lpid=82&chn=ps
Anyway here are pics of carb with the tool below and wondering if any of these look like they can be modified slightly.
Where should the gas level be reaching (maybe someone can Photoshop the level to easier identify it for others as well)?
One carb's gas level is between the top of the float bowl and the bottom edge of the top
(makes more sense with the pics below what i define as the 'between both edges area'):
The other carb is at the bottom of that edge of the float bowl:
Thanks for any direction!,
Ari
Last edited: