AaronKyle432
XS400 Member
I need some help on wiring. I have a 1977 XS400 and I bought a left side handlebar control that has the blinker control, horn, and High/Low beam switch from DimeCityCycles. I wired up the headlight, yellow wire, green, and black, but the light isn't coming on. I noticed that when I took apart the stock high/low beam switch, it had a blue/black wire attatched to the switch. So when the high is on, the yellow and blue/black wires are connected to each other. With the new switch, it's a push button (when it's pushed in, it's the high beam, when it's out, it's low beam.) How would I go about wiring the blue/black wire so it only powers to the light that's engaged? Hopefully that made sense, if not, I'll try and explain better. Thanks for help in advance