I don't recall what connectors the DOHC reg/rec has. Might need rewiring to connect.Thank you!
Think I'll try out the dohc regulator. That's the cheapest and closest one to me right now. If it's possible to make any of these work with any model, then I'm sure my electrician can wire it up right when I take the bike to him.
If he's good and understands the different type of regulators, then no problem.
Yes, the important part to note on both is where the other field coil wire goes. On one it goes to the brown 12v line and regulator, on the other it goes to ground.Am I right: with the low-side switched like RR32 (dohc regulator) it should be connected like this (one wire from field coil to ground and one to regulator): https://i.imgur.com/xChoS34.jpg?2
And with high-side switch like the RR38 should be connected like this (both wires from field coil to regulator): https://www.xs400.com/attachments/xs400_1979_wiring_diagram-jpg.3854/