Tj Gonz
XS400 Enthusiast
I was pretty close to giving up after having to buy a TCI & pickup coil & ignition coils..but now, well now Im throwing a fit like a 2 year old.
Finally got my bike firing on both cylinders & after jetting and pods it will bearly idle then die with any touch of throttle.
Heres what Ive tried:
Clean carbs
Clean carbs
Clean carbs
adjust mixture screws
2 washers on needles between orange bumper & clip
tried all diff size 135 140 145 150 155 main jets
adjust floats
Clean carbs
hooked up petcock vacuum
tightened all boot clamps
Any help Im grateful for, Im hating the bike at this point..
I know there are issues when jetting these but holy crap
Also are there supposed to be clips attaching the float needles to the tang?
Thinking PO might have screwed me yet again, I definitely do not see any.
Thanks,
TJ
Finally got my bike firing on both cylinders & after jetting and pods it will bearly idle then die with any touch of throttle.
Heres what Ive tried:
Clean carbs
Clean carbs
Clean carbs
adjust mixture screws
2 washers on needles between orange bumper & clip
tried all diff size 135 140 145 150 155 main jets
adjust floats
Clean carbs
hooked up petcock vacuum
tightened all boot clamps
Any help Im grateful for, Im hating the bike at this point..
I know there are issues when jetting these but holy crap
Also are there supposed to be clips attaching the float needles to the tang?
Thinking PO might have screwed me yet again, I definitely do not see any.
Thanks,
TJ