DynaGlide
XS400 Enthusiast
I ordered a sohc bolt kit from Dime City.
Turns out they resell AlloyBoltz kits.
Great quality. All bagged separately and includes revised torque specs for antiseize.
I think if this were my own bike I would splurge on a bolt kit. Since it isn't I ordered through Fastenal just what I needed. Total was $25. Not much of a savings I know.
I decided to measure the valve clearances and I can't get a 0.0015" feeler gauge under any of the 4 valves. I used the zip tie trick I read about to hold the valves in place so I could get the shims out and write down their thicknesses. I suspect the clearances are off from lapping the valves. I'll try the local shop to see if they have a significantly thinner shim I can borrow so I can measure which size I actually need for each valve.