Recent content by PEPXS400

So, I did almost suck it into the cylinders :D The cool part was I was using 2-stroke oil so it would have fouled the plug and lubed the cylinders. But like old mose said " be ready to hit the kill". FYI, it takes very little turning of the screw. Well worth the $3 in clear hose:thumbsup:.

Here is my first attempt. They look even...

That is a steal!! I have yet to find anything under $800. Nice dude!!

As promised. Every thing seems to be adjusted right.

I will do that tonight and post it. Forgive me, I'm new to the working on motorcycles:doh:

BS360, the video with the strobe is the left cyclinder. That just got me thinking, the video shows the left cylinder, but it is hitting the top mark. So, should it be hitting the bottom mark? I will shoot a couple of vids tonight. One left and one right.

What does the LF stand for? Pardon my ignorance on that

Thanks Guys! The manual does not say how to adjust the timining without points. The left coil has a intermittent pause not sure that could be a cause of any problems. I also ran into the problem of it running rich and carbon fouling plugs. I think I need to pull the tank back off and adjust it...

It was the spark timing. I think the PO messed with it.

It was the timing!! :cheers: I messed with advancing and retarding. Got her dialed in now:bike: Thanks for your help!! I will try and get another video here after a bit so everyone can see the difference. HUGE!!

Timing

Are u talking about this? I'm not sure on the timing. My thought was that the timing was off. But it is electronic, so no adjustment?

Well dang! I thing my cable it just to stretched out. May have to buy a new one or try and get on made. Thanks for replying!!

Awesome job! :bike: With those bars, did you have to shorten the front brake cable? I have bars that are close to the same and I can't get it adjusted far enough for the front break to catch correctly.

Hey guys! Need help with why my 1980 xs400 is back firing through the carbs. Check out the video and let me know what you think. Thanks!! FYI election ignition. No points. Rebuilt carbs and valves are set. It was doing this before I rebuilt the carbs, that is the reason why I rebuilt them.