Search results

Friends. What's a good source for a starter clutch repair kit for my '79 SX400? Thanks.

Guys. The Idle speed adjuster screw on a '79 XS400 gets turned in to increase idle speed, right?

Greetings All. Could someone please measure the length of the red line in this pic for the stock handlebars from a 1979 XS400? Model years 77-83 should be the same for these high risers. I'm guessing around 6 inches. Thanks for your help.

Greetings. I recently bought an1979 XS400F. When the center stand is down the rear tire rests on the floor. The shocks are standard 12.5" eye to eye and the wheels are standard 18" cast aluminum. I suspect the center stand is not stock and too short. Can someone please confirm the length of the...

Greetings All. I'm having a hard time getting the forks to drop after I removed the clips and pucks from the fork tops. The pinch bolts are completely out. Is there something I'm missing or are they just rust stuck? I squirted PB Blaster around the tops. I don't want to just start pound on them...

Greeting all. I have Mikuni BS34 carbs on my 1982 Yamaha Seca XS400RJ that don't have an external over flow tube. I don't see anywhere that it would be connected on the carb bodies. I had an overflow incident recently and the air filter was pretty much drenched. Is this typically where the...

Friends. I have a dead headlight on my 1982 XS400RJ. All other lights work--turn signals, stop/taillight, instrument lights, plus the neutral, oil and blinker on the center cluster. I took apart the Low-Hi beam switch to see if there was any obvious problem. Everything looked good although you...

Friends. I have a dead headlight on my 1982 XS400RJ. All other lights work--turn signals, stop/taillight, instrument lights, plus the neutral, oil and blinker on the center cluster. I took apart the Low-Hi beam switch to see if there was any obvious problem. Everything looked good although you...

Hi All. New here. I bought a 1982 Seca 400RJ about a month ago and would like to replace the stock petcock with a nonvacuum one. I did this on my Virago 250 and it works great. Can anyone tell me which petcock to get from the ones on Mike's XS? Thanks. Dennis