no spark

I posted about this earlier but I bough a project 79’ 400 that had a screw embedded in the head. I did a top end with a new head and that went fine. Compression went from 90L, 120R to 150 L and R. I went through some issues with the carb but it has been cleaned with a full rebuild (compressed...

I have a 1981 xs400 and had gotten it running after replacing the wiring harness. After riding for about 3 hours it decided to just up and die. Tried kick starting it but there is no spark, and the starter solenoid does not click when pushing the button. I tested the solenoid and it does work...

Hi, I’m Grant and I got a 76 Xs360. It was my dads, and in 1989 was stored. In January of this year, I pulled it out and started work. In august, it ran just fine for the first time. However, it started sputtering and getting progressively harder to start and dies with throttle. Now it won’t...

Hey all, ive got a 1978 xs400 that has power to all lights, horn, high and lowbeam, no blown fuses. I removed the dash, aswell as removed the starter solenoid and deleted the starter motor. I took the entire bike down to the frame and removed the harness to paint and weld a hoop in. When i put...

1982 xs400j maxim. Trying to find the source of a no spark problem. The right side has a nice spark. Left side has nothing. I checked the ignition coils and theyre both fine. Hooked up the multimeter to the wires running to the coils, cranked the starter and it showed that there was power going...