Viking
XS400 New Member
I have taken my pistons out and tried refitting new rings (+0,0) and when i push the rings in the cylinder to check the ring clerance/gap and the gap is about 0.8mm and the book says it´s max 0,02-0,04mm
I have measured the cylinder and pistons and they are in spec !
So the question is ! Have i missed something,or have i got the measurments wrong ?
Any hlp would be apprecited
Thanks in advance
I have measured the cylinder and pistons and they are in spec !
So the question is ! Have i missed something,or have i got the measurments wrong ?
Any hlp would be apprecited
Thanks in advance