Huddlebob
XS400 Member
This is my very first motorcycle project. I bought this aftermarket device for my turn signals, headlight, and horn control. It only has 8 wires while the original setup on my 1982 XS400s has 10 wires. However, they serve the same function (except the original blinker switch comes back to the center and leaves the blinker on until clicked in. The new switch is just left, right, and center).
Anyway, I tried to align the wiring diagram for the bike against the one for the new switch and nothing worked. Someone please help tell me which wires to connect to which!
I'll attach some pictures of the aftermarket switch (NOTE: the brown wire in the photo (#6) is actually a blue/white striped wire.
The third photo is the wiring diagram for the xs400s.
Thank you for your help!
Anyway, I tried to align the wiring diagram for the bike against the one for the new switch and nothing worked. Someone please help tell me which wires to connect to which!
I'll attach some pictures of the aftermarket switch (NOTE: the brown wire in the photo (#6) is actually a blue/white striped wire.
The third photo is the wiring diagram for the xs400s.
Thank you for your help!
