Bizzy13
XS400 Addict
That's what I said. Into the vacuum tube on the right intake boot.
That's what I said. Into the vacuum tube on the right intake boot.
The hole or nipple Im referring to is the tach mount. Problem is the shaft that spins and turns the cable is still in there, still spinning and spitting oil all over my engine. Can I get that out of there?? I can't plug it while its spinning.
I think he means on the other side of the carbs, the filter/intake side. If you connect the breather to the vacuum, it'll start pulling stuff (air/oil) from the crankcase straight into the combustion chamber. On the other side, with no pressure/vacuum, the breather is free to vent out as necessary.
Do not vent the crankcase into the intake boots between the carb and the head. Bad idea.