1. Having trouble logging in? Try closing your browser and re-opening it. If that doesn't work, try a different browser or device. The site will be updated soon to resolve these browser issues.
    Dismiss Notice
  2. Dismiss Notice
  3. Want an XS400.com t-shirt? Go to the store to order. Limited sizes and quantities available.
    Dismiss Notice

Fuel Tank Rear Mount Rubber Grommet Damper

Discussion in 'The Garage' started by clawhamm3r, Mar 9, 2023.

  1. clawhamm3r

    clawhamm3r XS400 New Member

    Does anyone have a lead on replacing part #13? It's NLA and can't find it anywhere in NOS. Any aftermarket versions, or a part from a different bike that will work? No other bikes cross reference for that part # but maybe something else will work.

    The XS650 grommet has a pad attached that goes under the tank (maybe replacing #14 on the 400s). Was thinking if all of the other dimensions were correct that I could trim the pad portion off, but it has a conical bevel on the top side. Open to other ideas.

    Also if anyone has one laying around on a spare tank let me know. :)

  2. franticvike

    franticvike XS400 Enthusiast

    Part 13 in what diagram? DOHC or SOHC bike?
  3. clawhamm3r

    clawhamm3r XS400 New Member

  4. franticvike

    franticvike XS400 Enthusiast

    Ah gotcha, I see the image in yoru second post, but not the one in your first post. Parts like those you gotta hope one shows up on ebay. Could you just take a bigger piece of rubber and carefully cut it down to size?

Share This Page