Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS400.com?Consider making a donation to help support the site. XS400.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
I recently picked up a 82 XS400 Maxim, she’s a little rough but runs good. Everything was working on it then my signal lights, horn, oil and neural lights stopped working. Fuses look ok Any ideas? Thanks
If original tube fuses they can look ok but still be burnt on edges.
Otherwise, get out your voltage meter and start testing for 12V on up the wiring. Check for unsecure grounding. Believe headlight bucket has most of that wiring
If original tube fuses they can look ok but still be burnt on edges.
Otherwise, get out your voltage meter and start testing for 12V on up the wiring. Check for unsecure grounding. Believe headlight bucket has most of that wiring
Not suggesting you but first before inspecting. Suggesting inspect and if burnt replace. I had one that looked good from top and testing continuity it wasn't passing through fuse box. Took out fuse and saw it blew a hole in the end of it.