Inside the Ignition. The harness burned up into the ignition so I had to replace the wires and re solder the connections.
I had to remove the side cover to reinstall starter.
Bullet connections with clear heat shrink on them.
Part of cooked harness
Inside the Ignition. The harness burned up into the ignition so I had to replace the wires and re solder the connections.
The T50 staples I used as an extraction tool.
The Amp/Tyco sockets I used
2. Mark each connector with a number to identify it. Mark the board with a line to indicate the branch length. On your schematic, indicate the connect
gbyamaha

Inside the Ignition. The harness burned up into the ignition so I had to replace the wires and re solder the connections.

There are no comments to display.

Media information

Album
1979 xs400 (xs250) harness rebuild
Added by
gbyamaha
Date added
View count
1,228
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top