Search results

ok so i found out the dimensions of the needle bearings fitted to xj400 seca and maxim swingarms The inner diameter 22mm The outer diameter 28mm The width of the outer race 20mm and i can find places that stock a oil filled bronze bush as well as many other types of bush. can i use them in my...

So if I yank on the chain I see movement in my swingarm. I cannot find.replacement bearings/bushings for my bike. What does the maxim use? Bearings or bushings.and.where can you get them?

Ok a bit of a weird one as far as I know my.bike is a 82 maxim. Has the correct style wheels etc. But im led to beleive the maxim is a 5speed gearbox. My bike has a 6 speed gearbox? Could my engine be out of a later seca? Also what is the standard jet sizes across the range in a dohc engine...

My starter motor is finito. So what other starter motors if any fit.the 400 dohc engine

So long story short. Bought a 82 maxim 400 for $200 complete bike except for the carbs. Always wanted.to make a bobber out of one. So the process started. The bike hadnt ran in 9 years so my work was cut out. Complete frame strip and paint. A little engine work and a nice set of drag bars...

Ok guys so test ride on.the bike today. And the rear end.feels loose. Yanked on.the.chain and.I seen the whole swingarm moving in.its mounts. Can swing.arm.be rebuilt and.which parts do I need?

So my front sprocket is.very wobbly. What parts hold the sprocket onto the shaft? I see the sprocket. There is no bolts by the looks of it and.no retainer. There is 2 blobs of weld where the sprocket holes are. Question is why was this done and why is the front sprocket wobbling. Also...

Hi guys on the back of the tci there is a metal plate held with 2 screws does this need earthed to the frame? Also. There is one wire cut on my tci unit. Has anyone got a pin out of what does what??

ok guys. so....long story. my maxim did not come with any carbs when i bought it. so i made a set of carbs fit off a kawasaki. they were a bank of 4 but i made my own brackets and they fit perfectly. they are bs32's now i know the maxim uses bs34s so i dont think i may make much of a difference...

what would cause soft front suspension? and can you change the fork oil without dropping the forks out of the bike?

question guys what carbs does the 82 maxim 400 use are they mikuni bs32 or bs34 carbs?

ok guys as you know the stock shock in a 82 maxim is quite long and im looking something shorter to drop the rear end. what is out there that will fit these bikes? maybe a shock from another bike?

My carbs are shot and need a complete set. Whats out there