turn signals

  1. E

    New turn signals wont flash, just stay solid.

    Hi, so here's my problem, I recently installed new indicators on my 1980 XS400G, everything is hooked up properly and works, except for one huge problem, the indicators wont flash. They just stay solid when ever I switch on either the left or right side. I have done some research and I think I...
  2. J

    Some Miscellaneous Problems, Experienced Advice Needed

    Thanks ahead to those curious and willing enough to hang out on the forums and dispense knowledge and wisdom to first timers like me. My first problem is a slow but persistent oil leak coming from somewhere around or behind the front sprocket. I bought my '81 Special last summer with 8600 miles...
  3. D

    Head and taillight work, turn signals dont

    Bike is a 1979 xs400. Took the old lady on a ride the other day but didn't adjust my suspension and once I came home I realized I had no lights at all. Quickly found the culprit to be a couple of pinched wires leading to the fuses. Now I have power back to my tail and headlight, but can't seem...
  4. RichieRiot

    Turn signal laws in Pennsylvania?

    I recently bought a '80 SX400SG that I want to start modding over the winter. Before I start the tear down. I had a question. I want to remove the turn signals from the bike so I can streamline it. Years ago someone told me that if the bike was built stock with signals you had to keep them...
  5. bakeLit

    LED flasher relay opinions

    Fellow riders, has anyone tried this particular relay to switch to LEDs? I'm thinking of getting it. Or is the "Triden"-way more reasonable to go with? And one more question - will the turn indicator still flash (and what if I put an LED there, too?)...
  6. JPaganel

    How to mount turn signals

    I am replacing my Mickey Mouse ear turn signals with chrome bullet style ones. The fronts were fine, I just drilled the original mounts a little and they fit right in. The rears are something of a problem - the rubber bushings are shot. One disintegrated completely. I can't make the mount stay...
  7. JPaganel

    Swapped gauges and the front blinkers quit

    I finally finished the mounting plates for the gauges I got from MikesXS to replace the busted speedo. Got everything mounted up, backlights light up, and... the front turn signals suddenly don't work. Checked the grounds, made sure everything was plugged in, still no go. This makes no...
Back
Top