Psyfox
XS400 Enthusiast
Hello everyone,
Long time no see/post.
I have been away in a career for a bit, and thankfully haven't run into troubles with my bike (80/81 xs400sg) nor really needed to break into the carbs...until now.
It turns out, one of my adjustable needles snapped because the prior owner had replaced the slide with an incorrect (but close) one.
Thus, I'm out of a needle, and when I had my mechanic pull it apart (in case it was worse than suspected), it turns out that I was running one adjustable and one non-adjustable needle (though...the non-adjustable has the correct slide...someone did a quick fix somewhere in time).
Low and behold, when I go to check ronayers.com for it (part 452-14116-09-00), it's no longer made. Though, the good news is now, I at least have another proper slide for when I do find a pair.
Thus, I was curious if anyone on here has a spare pair of these guys (looking for a pair to correct both sides, and they are necessary with my aftermarket exhaust)?
Thanks again everyone,
Psyfox
Long time no see/post.
I have been away in a career for a bit, and thankfully haven't run into troubles with my bike (80/81 xs400sg) nor really needed to break into the carbs...until now.
It turns out, one of my adjustable needles snapped because the prior owner had replaced the slide with an incorrect (but close) one.
Thus, I'm out of a needle, and when I had my mechanic pull it apart (in case it was worse than suspected), it turns out that I was running one adjustable and one non-adjustable needle (though...the non-adjustable has the correct slide...someone did a quick fix somewhere in time).
Low and behold, when I go to check ronayers.com for it (part 452-14116-09-00), it's no longer made. Though, the good news is now, I at least have another proper slide for when I do find a pair.
Thus, I was curious if anyone on here has a spare pair of these guys (looking for a pair to correct both sides, and they are necessary with my aftermarket exhaust)?
Thanks again everyone,
Psyfox