'81 Bobber (The Italian Stallion)

sbondoni

i did it 1 piece@a time
Messages
58
Reaction score
0
Points
6
Location
Alliance.Ohio
My first bike and build . I started off with a low budget cafe racer in mind but as i did more searching and looking things got out of hand ! my bike told me he wanted to be a bobber and to name him "The Italian Stallion" and so it begins ......
 

Attachments

  • bike.jpg
    bike.jpg
    6.2 KB · Views: 424
  • bike1.jpg
    bike1.jpg
    6.9 KB · Views: 412
  • junk.jpg
    junk.jpg
    7 KB · Views: 431
After tearing into this clunky looking 80's bike i did some more research . clean,clean and cleaned the carbs . With a lot of maulnipulation i got it all apart (thx bcware) and cleaned .
 

Attachments

  • jets.jpg
    jets.jpg
    2.4 KB · Views: 408
  • carb.jpg
    carb.jpg
    6.9 KB · Views: 440
I took out the electric starter motor and the chain ( its a kicker only ! )
 

Attachments

  • starter.jpg
    starter.jpg
    5 KB · Views: 397
  • e starter.jpg
    e starter.jpg
    5.3 KB · Views: 393
As i got into the stator cover i noticed the wireing was a little chewed up so i sniped it and started my rewiering
 

Attachments

  • stator wire.jpg
    stator wire.jpg
    3.1 KB · Views: 398
  • stator snip.jpg
    stator snip.jpg
    3.4 KB · Views: 383
  • stator 2.jpg
    stator 2.jpg
    5.2 KB · Views: 392
  • stator 1.jpg
    stator 1.jpg
    4.9 KB · Views: 408
I will be running no front brake,horn,ele.starter(kick only),tack,speedo,neutral or oil light . so it was time to dissect the harness/loom !
 

Attachments

  • old loom.jpg
    old loom.jpg
    6.9 KB · Views: 399
  • dissect loom.jpg
    dissect loom.jpg
    6.9 KB · Views: 390
  • new loom.jpg
    new loom.jpg
    5.3 KB · Views: 395
Thx Sandro ! I give u big props on ur build ,nice progress and the video gives me chills ! My relatives came from northern Italy and we keep the Bondoni name alive and well here in northern Ohio !
 
I hav always hated the look of the exhaust so i hacked it off and will be just running headers for now. besides the exhaust was rusted thru . i wraped the headers today and put the first coat of paint on the tank .
 

Attachments

  • headers and tank 001.jpg
    headers and tank 001.jpg
    312.5 KB · Views: 212
  • headers and tank 002.jpg
    headers and tank 002.jpg
    299.2 KB · Views: 201
  • headers and tank 003.jpg
    headers and tank 003.jpg
    155.4 KB · Views: 215
so i ran out of money but had plenty of time to kill before my front wheel gets done so i made some lollipop baffels for the headers .
 

Attachments

  • lollipops 002.jpg
    lollipops 002.jpg
    307.5 KB · Views: 238
  • lollipops 001.jpg
    lollipops 001.jpg
    204.3 KB · Views: 230
Back
Top