As far as I know, to adjust the clutch:
1. Loosen the adjuster at the clutch lever all the way (so the adjuster nut is right up against the lever).
2. Pop the black clutch adjuster cover off (the one at the motor).
3. Loosen the locknut.
4. Turn the adjuster in until you feel resistance, then back off 1/4 to 1/2 turn.
5. Tighten the locknut.
6. Adjust the lever adjuster till there is 2-3 mm of free play at the lever.
The problem I have is at step 3.When I try to loosen the locknut, I cant get it to loosen, it just kind of pushes in a bit and I dont go any further cause Im afraid Im gonna break something.