-
Enjoy XS400.com? Consider making a donation to help support the site.
XS400.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Clutch Safety Switch
- Thread starter MontanaXS
- Start date
XSLeo
XS400 Junkie
I might just bypass it. Follow the wires down into the headlight bucket. Unplug switch wirs. Make up a jumper wire for the plug the switch wires plugged into.
The bike will now start without the clutch lever pulled. Not really a problem as long as you remember this and either pull the clutch or put in neutral.
I think the clutch switch is the same as the front disc brake switch.
Not sure on that. Might want to check on a parts list to be sure.
Leo
The bike will now start without the clutch lever pulled. Not really a problem as long as you remember this and either pull the clutch or put in neutral.
I think the clutch switch is the same as the front disc brake switch.
Not sure on that. Might want to check on a parts list to be sure.
Leo
I think it is the same as the front brake switch as well. I bought some universal brake light switches and some new levers, but they are cheaply made and I’m going to switch back to the originals. I usually pull the clutch when starting, whether or not it is in neutral, but I would like to replace the switch just to be safe.
