Today i finished carbs!
thanks xschris, the float height is set to 26mm, i checked float needles, they are all metal.
Here they are, they dont look the best, but they look way better than before.
what was done:
- dissasembled and cleaned in ultrasonic cleaner
- sprayed with carbcleaner, rubbed with silicone brush
- all jets and small parts cleaned with carb cleaner and inspected
- all important passages sprayed and checked
- changed shaft seals
- floats set to 26mm
- changed all screws
- bench synced
cannot check if they work because bike is not ready to be started, so i have to wait if the cleaning and rebuilding was succesfull. lets hope it was
As you can see on the picture, I am missing choke shaft knob, any hints for replacement? searched ebay but no luck. I saw some funny knobs made from dice, or small 8ball. Or should i made something on my own? any hints?
next to do:
- change fuse box to blade type (ordered)
- check all electrical components and eliminate faulty parts