Shifter and foot peg relocation

[Crusher]

Hey guys I was curious to know what may be available or any ideas for moving my foot pegs and shifter as well as rear brake lever back to around the passenger foot peg area. I'm tall and wear size 15 us shoes and am turning this bike bobber over the winter here In wi. Thank you in advance

 

[LuckyEight]

The easiest way could be to buy some rearsets...

But I am not sure if bobber with rearsets will be rideable...

 

[Requiem]

You're probably going to want forward controls if you're going for a bobber build and need to relocate them. If i recall correctly TCbro's make a set for some models of the 400 SOHC. If you really want to move them back you could look at rearsets like luckyeight posted

 

[Crusher]

I just know they need to go somewhere else my flippers need room

 

[motoTrooper]

also maybe look at getting longer rear shocks so your knees aren't bent too much?

 

[Crusher]

Okay ya I will do some searching and have to see what I can come up with

 

[Crusher]

The rfy piggyback shocks I see on ebay are nice but can't seem to find one for the xs400 is the a length I should be looking for instead

 

[xschris]

also maybe look at getting longer rear shocks so your knees aren't bent too much?

Longer shocks won't help with how the rider sits on the bike. Only when he puts his feet on the ground.

 

[Crusher]

Think I have decided on making a set of highway pegs and then fab some forward controls in the future

 

[offroadjeepin]

The easiest way could be to buy some rearsets...

But I am not sure if bobber with rearsets will be rideable...

Who makes these? Also are brackets purchased or custom?

Thats a good lookin set up

 

[Wolfe_11B]

Those are Tarozzi rearsets. You have to make brackets yourself.

 

[motoTrooper]

Longer shocks won't help with how the rider sits on the bike. Only when he puts his feet on the ground.

Of course longer shocks allow space for foot peg relocation by giving more space under the vehicle to move pegs lower respective to the ground for clearance around corners!

 

[Crusher]

Ok ya I cut my rear sets off already I kept them but for now I don't need them