I'm muttering through getting the kickstart reinstalled. I've read the manuals, and watched a couple videos.
Do you have any tips from when you've had them apart?
I'm orientating with the tang on the shaft facing the back of the motor, the horseshoe clip (pinion clip) orientated downwards so that it sits in the relief in the case, then winding the return spring all the way around ( basically 360*), and landing it on the boss in the case.
I can rotate the kick by hand, and I get to about 9 o'clock and it stops. this is typical with the cover on, or off. It does not feel like i am coming up on compression, and that is limiting my travel, it feels like I am out of range of travel.
Any thoughts?