More specifically, the crank bearings.. For the XS360.
I ordered a set of bearings for the connecting rods.
I figured I would order the crank bearings as well since the engine is apart and Ive been moving internal parts around slightly over the months.
Obviously, the bearing are no longer available and are very pricey for just 1/2 of a bearing (P/N= 12R-11416-00-00)
I could probably reuse the bearings since the engine only had around 4000 miles on it. But I know one microscopic piece of embedded dirt will ruin the bearings.
Ive done some research one here as well and haven't really come up with anything. Theres gotta be a fix for this somewhere besides having the bearings re poured and having machine work done.
I ordered a set of bearings for the connecting rods.
I figured I would order the crank bearings as well since the engine is apart and Ive been moving internal parts around slightly over the months.
Obviously, the bearing are no longer available and are very pricey for just 1/2 of a bearing (P/N= 12R-11416-00-00)
I could probably reuse the bearings since the engine only had around 4000 miles on it. But I know one microscopic piece of embedded dirt will ruin the bearings.
Ive done some research one here as well and haven't really come up with anything. Theres gotta be a fix for this somewhere besides having the bearings re poured and having machine work done.