Which would be the correct diagram for a '76 xs360? I am helping my little brother with his bike and I think there is a problem with his charging system and it wold be nice to have the correct diagram for this bike.
another one.
not sure you need 20amps between light sw and kill switch. i would use a 10amp there
Anyone know of a SIMPLE diagram using field coil and mechanical Voltage Control Unit for my flat tracker, all I need is battery charging circuit as have no running lights/indicators, just a stop light which I can wire direct from battery
Can anyone tell me how to wire my contact breaker to my ignition coils? Im trying to wire my bike to run with no battery just kickstart only. 1981 heritage special
Posted via Mobile
re post no.69
"The only drawback is the brake lights don't work unless the light switch is on" surely on that diagram both brake light switches are fed from live side of light switch?
when the lights are switched on, low beam only.re the headlamp wiring, should not the red (feed) to hi/low come from switched side of light switch and the blue feed to low (dip) headlight come from the not used 3rd contact of hi/low switch?